Laden...
Red RC - RC Car News |
Yokomo BD9 linear SLF front springs Posted: 21 Feb 2019 08:50 AM PST Coming soon from Yokomo is their new line of linear SLF front springs for the BD9 touring car. Developed in cooperation with Axon, the springs offer a linear characteristic which will lead to a more aggressive steering feeling compared to the standard progressive front springs. In addition they are 1.5mm shorter, allowing for easier ride height adjustment when running smaller diameter tyres. The individually-marked springs come in 2.6 to 2.8 hardness and according to Yokomo they are also worth a try in the back of the car. Source: Yokomo [teamyokomo.com] The post Yokomo BD9 linear SLF front springs appeared first on Red RC - RC Car News. |
Posted: 21 Feb 2019 08:18 AM PST Xray have announced the addition of multi-times Austrian and Slovenian IC track champion, Nejc Mihelic to their team. The former ARC driver will campaign Xray’s RX8 platform at national and international events including the Austrian and Slovenian Nationals, the XRS as well as the ENS and he has the following to say: I’m super happy to join team Xray. I look forward working with the whole team and learning the new cars. I want to thank Xray for this opportunity to be a part of a very strong team. The quality of the products and team speaks for itself. See you all very soon at the race track. I want to thank ARC for the last 5 years. In the past we achieved great goals and claimed many wins. Source: Xray [teamxray.com] The post Nejc Mihelic joins Xray appeared first on Red RC - RC Car News. |
Axial 1/18 Yeti Jr Can-Am Maverick X3 T 4WD Posted: 21 Feb 2019 07:17 AM PST Horizon Hobby have introduced the new 1/18th scale Yeti Jr Can-Am Maverick X3 T 4WD brushed RTR off-road vehicle. The Yeti Jr RTR takes everything modellers admire about the 1/10th scale Yeti chassis and shrinks it down to 1/18 scale – then tops it off with a licensed Can-Am Maverick X3 body for a fun 4WD that anyone can handle. Out of the box, this tiny terror is ready for scale adventures. Before the Yeti, the only place to find an independent suspension with floating solid rear axle was in full-size off-road vehicles. Axial carried its advantages over into RC rock racers and crawlers. The suspension design give the Yeti Jr responsive handling, increased clearance, and improved stability at high speeds. Its included 380-size motor adds the perfect amount of speed and torque, controlled by the Maxxis Bighorn 2.0 radial tires, the Spektrum brushed speed controller and the Spektrum STX2 transmitter. The package is rounded out by a 7.2V 1300mAh NiMH battery pack, a USB charger and AA batteries for the transmitter, making the vehicle a true ready-to-run kit. Features: Source: Horizon Hobby [horizonhobby.com] The post Axial 1/18 Yeti Jr Can-Am Maverick X3 T 4WD appeared first on Red RC - RC Car News. |
HRC Racing 68110DMG digital standard size servo Posted: 21 Feb 2019 02:58 AM PST HRC Distribution have introduced the HRC Racing 68110DMG digital standard size servo. Developed for 1/10th scale on-road and off-road classes, the servo features double ball bearings, sturdy metal gears and it comes with a heavy-duty 22AWG receiver wire. The servo’s waterproof case allows the use in unfriendly environments, making it ideal as a replacement for standard RTR kit servos. Specifications: Source: HRC Distribution [hrcdistribution.com] The post HRC Racing 68110DMG digital standard size servo appeared first on Red RC - RC Car News. |
Kyosho Turbo Optima 1/10th 4WD buggy kit Posted: 21 Feb 2019 01:55 AM PST First seen at the recent Nuremberg International Toy Fair in Germany, Kyosho have now revealed more information on their forthcoming new re-release Turbo Optima 1/10th scale 4WD vintage buggy. Based on the iconic mid-1980’s Optima buggy, the original Turbo Optima back in the days featured race-proved optionals such as larger diameter tyres, larger volume shock absorbers, front and rear anti-roll bars as well as the 8.4V compatible Le Mans 240S brushed motor. Many of these features now also found their way into the re-release model that in addition sports a full assortment of gold-colour chassis and suspension parts, modern threaded aluminium shock absorbers, a slipper clutch, as well as newly designed 50mm/2.0” block tread tyres for improved traction. The Turbo Optima’s body shell was faithfully recreated and the updates, such as the 48 pitch drivetrain gears and the belt drivetrain, allow to use today’s powerful brushless motors and LiPo battery packs. The buggy is set for a release in March. Key features: Source: Kyosho [kyosho.com] The post Kyosho Turbo Optima 1/10th 4WD buggy kit appeared first on Red RC - RC Car News. |
Xray 4S C=3.0 touring car springs Posted: 21 Feb 2019 01:30 AM PST Xray’s 4S super short touring car shock springs are now also available in a hard C=3.0 variant. Adding to the already available 2.3 to 2.9 linear springs, the super hard set comes in handy when running in high to very high bite track conditions. Like all other Xray springs, the 3.0 are manually measured, selected and matched into pairs to guarantee equal length and damping characteristics and they not only fit Xray cars but many other brands. Source: Xray [teamxray.com] The post Xray 4S C=3.0 touring car springs appeared first on Red RC - RC Car News. |
Zero Tribe working on T4 mid motor conversion Posted: 21 Feb 2019 12:40 AM PST Japanese brand Zero Tribe, known for their popular Xray T4 FWD conversion, have released first renderings of a mid motor conversion for Xray’s T4 electric touring car. The design is inspired by Tamiya’s TA05 car and Awesomatix’s A800 MMCX mid motor conversion, with the equal length front and rear belts making for quicker and more even throttle response while the placement of the somewhat heavy motor creates an optimised overall balance. The kit will allow the use of shorty-type LiPo batteries as it is a developing trend when running indoors. We bring you more information on the kit as they surface. Source: Zero Tribe [zerotribejapan.com] The post Zero Tribe working on T4 mid motor conversion appeared first on Red RC - RC Car News. |
T-Works MP10 & MP9 aluminium centre driveshafts Posted: 21 Feb 2019 12:02 AM PST Coming from T-Works and made for Kyosho’s Inferno MP10 and older MP9 buggies are several aluminium centre driveshafts that were developed to reduce the drivetrain’s rotational masses. The MP10-specific set includes 117mm and 85mm alloy dogbones while the MP9 TKI4/3 and MP9E compatible set comes with 115mm and 87mm long variants. Last but not least is a set specific to the MP9E Evo with 149mm and 56mm long driveshafts. All all made of high-quality 7075-T6 aluminium, they come with a black, hard-anodised surface for wear and also include high-quality outdrives. All dogbone driveshafts are also available separately for spares or repair. Source: T-Works [rc-tworks.com] The post T-Works MP10 & MP9 aluminium centre driveshafts appeared first on Red RC - RC Car News. |
Protoform X-Lite 190mm touring car bodies Posted: 20 Feb 2019 11:43 PM PST Protoform have introduced their new X-Lite 190mm touring car body shells with the popular Type-S, D9, LTC-R and MS7 all being available in the new ultra lightweight variant. With high-grip surfaces such as CRC black carpet now the norm, the weight of 190mm touring car bodies is more crucial than ever. X-Lite bodies will help lower the CG of the car even further than the PRO-Lite types, resulting in better, more responsive handling, less traction roll, and faster lap times. This means Protoform now offers a total of three different body shell weights with the 0.7mm thick “Light Weight” being the standard variant, ideal for races that enforce minimum body weights – such as the ETS – followed by the lighter “PRO-Lite” and ultra lightweight 0.5mm thin “X-Lite” types. Source: Protoform [racepf.com] The post Protoform X-Lite 190mm touring car bodies appeared first on Red RC - RC Car News. |
Pepito Colon wins at BRCC N.E.O.S. Series Rd2 Posted: 20 Feb 2019 08:42 AM PST Round 2 of the BRCC N.E.O.S. Series was held in Puerto Rico last weekend. The event was hosted by Pun RC Sport and saw the running of several 1/8th and 1/10th on-road classes. In 1/8th Nitro GT it as Fernando Mendez with the overall TQ, however after the 30-minute A-main final it was P11 qualifier, Pepito Colon with the win some 33 seconds in front of Fernando. P8 qualifier, Alex Fagundo would come in 3rd, some 13 laps behind the top 2. Source: IGT8 [igt8.com] The post Pepito Colon wins at BRCC N.E.O.S. Series Rd2 appeared first on Red RC - RC Car News. |
You are subscribed to email updates from Red RC - All feeds. To stop receiving these emails, you may unsubscribe now. | Email delivery powered by Google |
Google, 1600 Amphitheatre Parkway, Mountain View, CA 94043, United States |
Laden...
Laden...