Red RC - RC Car News

Losi 1/6 Super Baja Rey 4WD RTR desert truck

Posted: 28 Dec 2017 06:47 AM PST

Coming soon from Losi is the 1/6 Super Baja Rey 4WD brushless RTR desert truck. The truck offers realistic handling characteristics like the big boys, thanks to the long travel solid 4-link rear axle and independent front A-Arm suspension. Four long-travel coil-over shock absorbers soak up any form of terrain and the chassis is equipped with an aluminium main plate and a sturdy 4×4 driveline with adjustable differentials. The truck is topped it off with an authentic four piece body, full bodied roll cage, and driver figures. A Dynamite Fuze 1200kv 6S-capable motor and 160A speed controller help to propel the truck to speeds of up to 80km/h and the control is taken care of by a Spectrum DSMR radio system with Active Vehicle Control technology.

Features:
– Long-travel 4-link live rear axle
– Long-travel independent A-arm front suspension
– Coil-over oil-filled shocks with pre-load adjustment
– Dynamite Fuze 1/6 1200kv brushless motor & 160A ESC
– Full-bodied roll cage
– True-to-scale body panels
– Aluminium chassis
– 4×4 driveline with adjustable differentials
– LED light bar
– Large scale servo
– Rear loading battery
– Full-size spare tyre
– Spectrum DX2E Active radio system
– Active Vehicle Control technology

Source: Horizon Hobby [horizonhobby.com]

Muchmore Hudy & Arrowmax 1/10th setup system stand

Posted: 28 Dec 2017 03:24 AM PST

Muchmore have announced the release of a setup system stand for the 1/10th systems of Hudy and Arrowmax. The part is machined from high-quality translucent material, it sports an etched Muchmore logo and takes the four setup systems, wheel thumb nuts as well as the toe plate. The tool is small to save valuable pit and storage space and it can be stored in the original setup system boxes.

Source: Muchmore [muchmoreracing.net]

SWorkz S12 series aluminium rear hub carriers

Posted: 28 Dec 2017 03:10 AM PST

Coming from SWorkz and made for the S12 series of buggies is an aluminium rear hub carrier set. It is made from high-quality alloy for improved durability and offers an updated design with six new upper camber link mounting positions for enhanced tuneability. In addition the hubs are usable with the smaller 6x12x4mm ball bearings for a lower weight.

Source: MW RC Cars [mwrccars.at]

T-Works foldable 1/8th & 1/10th shock stand

Posted: 28 Dec 2017 02:40 AM PST

T-Works have introduced their all-new foldable shock stand for 1/8th and 1/10th shock absorbers. Constructed from black anodised aluminium and high-quality carbon fibre the shock stand is usable for most 1/8th and 1/10th shock absorbers thanks to plastic inserts with varying inner diameters. White markings for the front and rear, left and right hand shocks make setting up or maintain dampers a breeze and when not in use, the stand also acts as a power connector soldering jig and small parts tray.

Source: T-Works [rc-tworks.com]

Reedy Blackbox 850R 1/8th competition ESC

Posted: 28 Dec 2017 02:28 AM PST

Team Associated have introduced the new Reedy Blackbox 850R brushless speed controller for 1/8th competition applications. Track-tested and competition proven, Reedy’s Blackbox 850R is a versatile and powerful ESC capable of winning at the highest levels of competition. A wide range of precision adjustability, excellent throttle and brake feel, and durable high-quality hardware make the Blackbox 850R perfectly suited for 1:8 buggy and truggy applications. The 850R comes pre-programmed with settings that are suitable for most applications and track conditions. But by utilising the Blackbox PROgrammer2, the full potential of the 850R can be exploited. In addition to working as an ESC programmer, it functions as a battery monitor and USB firmware update device.

Features
– CNC-machined black aluminum case with integrated heat sink
– Fully adjustable brake, throttle, power, and safety functions (with Blackbox PROgrammer2)
– Precision throttle and brake control
– Ultra-low resistance FET board
– Solder tabs with heavy-duty power wires
– Integrated power capacitors
– 30mm fan
– RPM and ESC temp data logging (with Blackbox PROgrammer2)
– Firmware updateable (with Blackbox PROgrammer2)

Specifications:
– Voltage input: 2S-6S LiPo
– On resistance (mOhms): 0.36
– Continuous current (A): 150
– Dimensions (mm): 56 x 46 x 37
– Weight w/o wires and fan (g): 131
– Motor limit, 4S: 3000kV
– Motor limit, 6S: 2400kV
– BEC: 6.0-7.4V/5A
– Fan: Integrated

Source: Team Associated [teamassociated.com]

Team C Racing TM8E 1/8th E-buggy kit

Posted: 28 Dec 2017 02:09 AM PST

Coming in early 2018 is Team C Racing’s TM8E 1/8th E-buggy kit. The car will make use of a new lightweight aluminium chassis, new front and rear aluminium chassis stiffeners, a new aluminium front plate and a redesigned aluminium servo mount. Other features include new design arms with carbon stiffeners, an updated centre diff mount cover and a new aluminium motor mount. The kit will hit stores February.

Source: Team C Racing [teamcracing.net]

JConcepts Fling Kings tyres & Dragon 2.6” wheels

Posted: 28 Dec 2017 01:18 AM PST

Made for the use with JConcepts’ Sling King Mega Truck body shell as well as comparable vehicles are the new Fling Kings 2.6” Mega Truck tyres and Dragon 2.6” wheels. The Fling Kings is the first true to scale, RC Mega Truck tyre, specifically designed to throw mud, dirt, gravel and grass just like the real thing. They are designed for the new JConcepts 2.6” Dragon wheel, making them even more scale in appearance. The bead of the tyre features a 3-step surface which provides a massive amount of area for glue to rest giving the utmost security for full-throttle mud runs. No details were spared on these mud runners, the V-type tread is replicated to a T and the top of the tread carries a slight recess adding a little touch of depth to the appearance. The soft blue compound which is recommended for dirt, grass and asphalt feels noticeably mushy and sticky and has expanding characteristics and tend to “pizza cutter” during flat out high-speed runs. The gold compound feels harder to the touch, excels on polished or hard surfaces and expands less during high-speeds. Fling Kings tires are complete and include open cell “React” inserts to support the grippy tyres.

As for the Dragon 2.6” wheel, it is a purpose built 12mm hex mega truck wheel which fits the above Fling Kings tyres to perfection. The Dragon’s were used in concept and in conjunction with a fully licensed version of the 1:1 scale King Sling. The goal of scale size was achieved and built around a 2.6” mounting bead diameter. The width was matched to line-up perfectly with the Fling King tyres and the constraints of the wheel were underway. Like other monster wheels by JConcepts, a bolt-in hub adaptor was created to match a huge variety of trucks while also offering different overall widths to choose from. The bead of the wheel features a 3-step surface which provides a massive amount of area for glue to rest giving the utmost security for full-throttle mud runs. The Dragon wheel includes four off-set 12mm wheel adaptors. 11mm width for a stock Clod Buster or retro type Monster Truck width, 18mm for increased stability on vehicles such as the Stampede, Stampede 4×4, Rustler, Slash 4×4. The 25mm adaptor works well for monster truck racing and the Axial SMT10 and a newly designed 32mm for maximum ground pounding width. The adaptors are installed with 6×2.5x12mm screws and centres precisely on the wheel for positive engagement. The wheels include pre-cut polycarbonate discs which attach with 6x2x4mm screws and can be painted to match any scheme or mud runner. The wheel discs add a scale look and utilise a clever design not seen in this segment of RC. Also included is a pair of steel, serrated, 4mm thin pattern lock-nuts for greater security. The Dragon wheels are available in black and feature a slight matte finish but with the addition of the polycarbonate disc, can easily be detailed to be outrageous.

Source: JConcepts [jconcepts.net]

JConcepts King Sling Mega Truck body

Posted: 28 Dec 2017 01:04 AM PST

JConcepts have introduced the new King Sling Mega Truck body shell. From the mind of Dennis Anderson, the wild and wooly King Sling was born. The ultimate Mega Truck, born in Poplar Branch, North Carolina, has a wild side, combining the brute power and durability of a monster truck with the madness of a mud racer. King Sling is a beast, and JConcepts has worked together with designers and builders to replicate this body shell to fit on a host of popular chassis including the Axial SMT10. The slate was once again wiped clean and the form started to take shape in the computer to fit and finish on a selection of vehicles. A lot of hand dressing took place to ensure the details were correct on the shell itself, not to mention the iconic wing shape and rear scoop treatment. Fred “Freestyle” Reep sat shotgun on this project reviewing the style, shape and decal creation to ultimately please the man, the myth the legend, Dennis Anderson. No superstar race machine would be complete without decoration. The King Sling is the first JConcepts body to include two decal sheets in the package that covers logos, signatures, flames and branding recognition.

The product is formed in durable polycarbonate and includes painting window mask for ease of use. Fine detailing and trimming to the body shell comes from the purchasing enthusiast where the imagination and skill set takes over. The three piece body design offers the highest quality in detail giving the builder several options, replicating the original King Sling or even creating a unique RC Mega Truck identity. Included in the package are the clear King Sling body, painting window mask, rear wing, scoop, mounting hardware and decal set.

Source: JConcepts [jconcepts.net]

VP-Pro 6.5” 1/10th buggy rear wing

Posted: 28 Dec 2017 12:57 AM PST

Coming from VP-Pro is a new 6.5” 1/10th buggy rear wing. It is made from tough yet lightweight 1.0mm polycarbonate and its shape will ensure high stability, low drag and thus great high speed and jumping characteristics and a low overall centre of gravity. The wing comes clear and it fits most 1/10th 2WD and 4WD buggies.

Source: VP-Pro [vp-racing.com]

CRC Carpet Knife Twenty5 Japan Edition

Posted: 28 Dec 2017 12:36 AM PST

Japanese CRC distributors Kimihiko Yano have introduced a special Japan Edition of the CRC Carpet Knife Twenty5 1/12th scale pan car. The CK25J kit is available with a carbon or aluminium chassis, it comes with a matching lower pod plate, a new carbon fibre sliding servo mount plate as well as the light weight carbon fibre X Brace. The car will use a longer wheelbase than the standard US version that allows to run long Xray side links while the servo mount plate utilises KO Propo or Sanwa servos. In addition the distance between the centre pivot and the rear axle was shortened to improve rear traction which is further helped by the new X Brace. Features such as the LCG sliding motor mount, the new-design front bumper and the balanced double-clamping left wheel hub were taken over from the popular US version.

Source: Kimihiko Yano [kimihiko-yano.net]