Red RC - RC Car News

Tekin RS Pro Black Edition ESC & Spec-R BL motors

Posted: 24 Aug 2017 10:37 AM PDT

Tekin have introduced their new RS Pro Black Edition brushless speed controller and Spec-R motors. Starting with the ESC, the RS Pro Black Edition was developed with ultra low internal resistance in mind to boost the performance of 1S and 2S-powered stock motors. This was achieved by utilising both hardware and software advances in combination with the Ultra Low Resistance ULR circuit design and ULR flex wires. The controller measures 24.5x33x17.25mm, it weighs in at 35g and it usable with 1S to 3S LiPo input and down to 13.5T motors.

As for the Spec-R motor, it is based on the widely popular Gen3 motor platform, and brings new technology to the racetrack. Tekin’s ULR design with proprietary specifications and high grade materials make for ultra smooth control across a wide power band. The motor comes with the yellow high-strength rotor and it is available as 6.5T, 13.5T, 17.5T and 21.5T variant.

Source: Tekin [teamtekin.com]

JConcepts 1/8th & 1/10th tyre balancer

Posted: 24 Aug 2017 09:21 AM PDT

Coming from JConcepts is their new tyre balancer suitable for 1/8th and 1/10th scale tyre and wheel combinations. The collapsible design rests in a lay-down configuration but pivots to a 90 degree stance and locks when in usable condition. The centre point of any balancer are the bearings, the free spinning action rests inside the hub design. The interchangeable thumb nuts for 1/10th and 1/8th wheel versatility are located on the main axle which can be moved from its home base position to its critical balancing position with ease. The upright is built in aluminium material, anodised blue, etched with instructions and chamfered for that extra lustrous look. The base of the item is built to protect, position and maintain a small footprint at all times. The base has four stand-off legs to hold a steady structure while a thumb screw secures the upright in either the up or down position. The all-aluminium and steel design comes set in a storage box for protection and travel convenience.

Source: JConcepts [jconcepts.net]

British Off-road Grand Prix – Announcement

Posted: 24 Aug 2017 08:12 AM PDT

The British Off-Road Grand Prix will take place January 12th to 14th 2018 at The Centre:MK in central Milton Keynes. Classes run will be 2WD and 4WD Buggy and 2WD Short Course. Full entry details will soon be available over at Schumacher.

Sidney Blokker wins Touring Modified at Dutch Nats Rd5

Posted: 24 Aug 2017 07:58 AM PDT

Round 5 of the Dutch Electric On-road Nationals was held at the technical track of Deventer. The small track offers plenty of grip but also high kerbs which would play a major role in the race. The premier Touring Modified class is run according to EFRA rules and only a single set of Volante 36R tyres is allowed for the entire race. In Q1 and on new tyres, Mitchell Van Es (Awesomatix) took P1 in front of Florian Joos (Tamiya) and Sidney Blokker (Yokomo). Then Florian managed to win Q2 thanks to an error from Mitchell in the last lap but Mitchell stroke back and won Q3 in front of Sidney and Florian. This meant Mitchell would take P1 on the grid in front of Florian, Sidney, Rick van den Akker (Xray) and Niek Middelkoop (Xray).

In the opening A-main Mitchell took the holeshot and thanks to the fight between Florian and Sidney, he was able to pull a gap. Sidney tried several times to pass Florian, but when they tangled, Rick took over P2. Sidney found his way past Rick while Mitchell took an uncontested win. Florian came in 3rd in front of Rick and Niek. A2 was almost a blue print of A1. Sidney elbowed his way past Florian and leapt in Mitchell’s slipstream when disaster struck. Sidney took the inner line coming to the fast left-hander in front of the rostrum and Mitchell tried to keep the door shut. Unfortunately both cars touched and while Sidney was able to take P1, Mitchell had an horrible crash into the concrete barrier. It not only shattered his right rear suspension but also his complete chassis. As for the results, the saw Sidney in front of Rick, Florian, Niek and Bram Lagerwey (Serpent). As Mitchell wasn’t able to fix his car the P1 slot was left unoccupied for the start of A3. Florian took the lead, and managed to win A3 despite immense pressure from Sidney as Rick took P3. The overall results had Sidney Blokker (Yokomo) taking the win from Florian Joos (Tamiya), Rick Van den Akker (Xray), Niek Middelkoop and the unfortunate Mitchell Van Es (Awesomatix).

Source: T2M [t2m-rc.fr]

Contact GT12 control tyres

Posted: 24 Aug 2017 07:22 AM PDT

Schumacher have introduced the new Contact GT12 control tyres. GT12 racing has become more complex over recent times with a myriad of different foam compounds to find the ultimate performance. Now Contact RC are taking it back to basics which made GT12 racing so successful. These new control tyres with an easily identifiable green stripe can be adopted at local clubs and larger events to have a more level playing field for all, and keep costs down. The control tyres are available in only one compound, 40 shore front trued to 44mm and 37 shore rear trued to 46mm, selected to give the perfect balance for the majority of conditions.

Source: Schumacher [racing-cars.com]

Rune Karlsen wins Norwegian 1/8th Buggy Champs

Posted: 24 Aug 2017 06:45 AM PDT

The Norwegian 1/8th Nitro Buggy Championships were held at the Hof MBK track last weekend. The biggest track in Norway offered a multi-surface layout with mostly dirt but an astro and a wooden corner, and also a paved stones section with made tyre choice critical. Nearly 50 drivers signed in and the weekend would kick off on Friday with the first practice sessions. During Saturday’s qualifiers Rune Karlsen took the overnight TQ from Bjorn Ivar and Yngve Brække Ulfset. Going into the main final a total of six drivers looked to be able to take the win, making it the strongest field in many years. From the tone, Rune would be in the lead followed by Daniel and Yngve. Some nine laps into the race Yngve made a mistake and let Rune and Daniel play a little before Rune started to push a little harder. His strategy worked out as Daniel made a mistake. Now Rune was on fire and just getting a bigger lead. 40 minutes in the final Rune had lapped everybody while Daniel was in 2nd place at that time, but Bjorn Ivar was faster and took over the 2 spot. In the closing stages Yngve got past as well as Daniel made a big mistake. Ultimately Rune Karlsen (Kyosho) would take the win from Bjorn Ivar Haug (Kyosho) 2nd and Yngve Brække Ulfset (Mugen) 3rd.

Source: Kyosho [kyoshoeurope.com]

Raceform Lazer differential rebuild pit

Posted: 24 Aug 2017 06:19 AM PDT

Raceform have introduced their new Lazer differential rebuild pit. Precisely machined from Plexiglas for a low weight and good durability the tool includes machined holes to hold the gear differentials of 1/8th and 1/10th vehicles during building, maintenance and setup. Tray compartments with milled slots make for easy pick-up of shims and small parts while the included inserts allow to reduce the diameter of the diff holding holes when working on smaller 1/10th diffs. The underside features an anti-slip padding and the pit is available in eight different colours to fit any colour scheme.

Source: Raceform [raceformrc.com]

Essex Winter Series 2017/18 – Announcement

Posted: 24 Aug 2017 05:40 AM PDT

The EWS Events team has announced the 2017/18 Essex Winter Series presented by Infinity. The seventh season of one of the biggest on-road series in Europe will again feature the huge 24×34 metres ETS carpet track, and cater for touring cars in two classes – Modified and Super Stock 13.5 Blinky. Sweep Racing continue as the tyre supplier, with the unique EWS-branded tyres available from most good model shops, or on the day at the event from the organisers. The series will again feature five, one-day events throughout the winter months with entries now open and expected to fill up very quickly. More details, dates and rules can be found on the EWS website where entries can also be made, or on the EWS Facebook page.

Losi DBXL-E aluminium top plate & chassis braces

Posted: 24 Aug 2017 03:15 AM PDT

Losi have introduced new aluminium option parts for the DBXL-E kit in the form of a front top plate as well as front and rear chassis braces. Available separately and coming machined from high-quality alloy material the parts are specific to the DBXL-E and its chassis layout. The black anodised items feature machined silver edge details and they add strength and durability while offering improved visual appearance compared to the stock parts.

Source: Losi [losi.com]

Rob Janssen wins at Dutch On-road Nationals Rd5

Posted: 24 Aug 2017 03:01 AM PDT

Round 5 of the Dutch Electric On-road Nationals was held at the technical Hotwheels Deventer track. In the Touring Stock class Rob Janssen would take the TQ from Wesley van Dijken 2nd and Sybrand de Boer 3rd. In the finals Rob would make a clean sweep, taking wins in all three legs to snatch the overall win while Wesley and Sybrand battled for the runner-up spot, which further helped Rob up front. Ultimately Sybrand would prevail and take the 2 spot from Sybrand who rounded out the podium result.

Source: HRC Distribution [hrcdistribution.com]