Red RC - RC Car News

PSM B74 front & rear chassis brace sets

Posted: 26 Jan 2021 10:18 AM PST

PSM have released new front and rear chassis brace sets for the Associated B74. Developed to improve the performance of your B74 vehicle, the rear features three 9,5g balancing weights and an aluminium body, while the front features one 9,0g balance weight. Especially in high traction conditions, the included balance weight can help to dial in the balance of your buggy and the aluminium design reduces lateral torsion in the centre of the chassis. In addition. the longitudinal stiffness of the vehicle will be improved as well.

Source: PSM [psmfactory.com]

The post PSM B74 front & rear chassis brace sets appeared first on Red RC.

HotRace 1/8 Buggy white compound

Posted: 26 Jan 2021 07:43 AM PST

HotRace Tyres have announced that they have introduced a new white compound in their most popular 1\8 buggy tire lines. Intending to improve current compounds on clay track conditions, the reality was that this new compound worked really good not only in clay track conditions but also in other conditions too. Testing over the lasts 5 months, all over the world, they have found it to work good on oiled track, clay track, indoor track, wet track and astroturf track and especially between 0 to 15 degrees. The new white compound will only be available for now for Bangkok V2 and Amazzonia.

Source: HotRace Tyres [hotracetyres.com]

The post HotRace 1/8 Buggy white compound appeared first on Red RC.

SWorkz S35-T2e brushless racing truggy

Posted: 26 Jan 2021 07:22 AM PST

SWorkz have released the electric powered version of their recently announced S35-T2 truggy, the S35-T2e. The geometry of the car aims to provide great corner speed with exceptional traction and improved control. Featuring a T7075 hard anodised and lightened aluminium chassis, this wide layout has been tested by their team driers to guarantee the best performance. The newly developed Truggy HET differentials are included and provide traction that was not possible before. The new S35-T2e also comes with a longer shock layout in the front and rear, the construction of which is adapted to that new optimised layout. The steering geometry, with new Ackerman and steering plates, gives the driver a feeling of total control and with the new toe-in plates, which now contain square inserts, you can easily adjust the geometry to fit every track layout and track condition.

The lower arms are now made of a newly developed composite material and the side guards were also redesigned and use this same new material as well. With the new lightened wing support you can easily adjust the angle of the wing to give your S35-T2 the best stability on any track. Together with the ‘Speed Rhinoceros III’ body shell, perfect aerodynamics are achieved. Finally, the S35-T2 comes with totally newly designed rear hubs. Made from composite materials combined with 2 carbon plates this configuration gives a wide range of setup possibilities. The new designed Motor mount makes it possible to change the motor or adjust the mesh of the gears very easily.

S35-T2e Kit Features:
– New T7075 Hard Anodised, Lightend Aluminium Chassis
– New Wide Chassis Design
– New Design Shock Towers
– New Shock Caps
– New Fixed Shock Spring Holder
– New 3mm Updated Rear Shock Studs
– New Ackerman Plate
– New Steering System
– New Servo Saver Aluminium Part
– New Servo Saver Fixable Nut
– New Servo Saver Plate
– New Servo Saver Post Locking Design
– New Steering Balls
– New Steering Knuckle Plates
– New Updated Toe-In Plates with Square Inserts
– New Lightweight Wing Mount
– New Side Guards
– New Lower Front and Rear Arms
– New Front Upper Arms
– New Body Posts Front and Rear
– New Composite Rear Hubs with Carbon Plates
– New Multi Adjustable Ball System for Rear Upper Arms
– New Anticlock Screws for Shocks
– New Easy Change Motor Mounting Plate
– 3 HET Differentials Included
– New Front and Rear Universal Cross Drive Shafts
– 2 Front Chassis Braces Included
– Black Competition Shock Springs Included
– Adjustable Wing Position
– Adjustable Wing Angle

Source: MW RC Cars [mwrccars.at]

The post SWorkz S35-T2e brushless racing truggy appeared first on Red RC.

Tekno RC aluminium sway bar collars

Posted: 26 Jan 2021 07:15 AM PST

Help keep the sway bars of your EB48 2.0 and NB48 2.0 vehicles in place for a long main with these new aluminium collars from Tekno RC. CNC machined from aluminium and hard anodised, these collars are less likely to move due to the threads being damaged from over-tightening or a direct hit to the sway bar. These are a direct replacement for the stock plastic collars and require four M3x4mm set screws.

Source: Tekno RC [teknorc.com]

The post Tekno RC aluminium sway bar collars appeared first on Red RC.

T-Works XB4’21 graphite electronics mounting plate

Posted: 26 Jan 2021 02:44 AM PST

T-Works have released this graphite electronics mounting plate for the Xray XB4’21. Replacing the standard plastic electronics mounting plate in the kit, the new graphite version is lightweight and adds that bling factor. Supplied with mounting hardware.

Source: T-Works [rc-tworks.com]

The post T-Works XB4’21 graphite electronics mounting plate appeared first on Red RC.

Koswork hex & nut driver set

Posted: 26 Jan 2021 01:48 AM PST

Koswork have introduced this handy hex and nut driver set. Coming complete with the most popular sizes included, it also includes a convenient tip holder. The lightweight ergonomic handle accepts the high quality long-lasting tool tips with the set coming with a 1.5mm, 2.0mm & 2.5mm hex and 5.5mm & 7mm nut driver included.

Source: Koswork [koswork.com]

The post Koswork hex & nut driver set appeared first on Red RC.

Xray XB4’21 special 6mm profiled shape steering plate

Posted: 26 Jan 2021 12:40 AM PST

From Xray for the XB4’21 is this aluminium special 2-hole 6mm profiled shape steering plate. CNC-machined from premium Swiss 7075 T6 aluminium, it is designed & recommended for use in high-traction conditions and helps increase steering precision and predictability. Also fits the XT4.

Source: Xray [teamxray.com]

The post Xray XB4’21 special 6mm profiled shape steering plate appeared first on Red RC.