Red RC - RC Car News

Reds Racing 1/8th Z8 Pro ESC Gen2

Posted: 03 Sep 2020 07:09 AM PDT

Reds Racing have introduced the follow up to their 1/8th Z8 Pro ESC, the Z8 Pro Gen2. The new ESC is the result of over a year of testing and development together with Reds Racing team drivers. Improving both the power board and the control board with new components for higher reliability and durability as well as for better cooling. They have also changed the fan polarity to make it compatible with 1/10 ZX esc and with other fans on the market and have designed a new lightweight fan protector to improve fan blades reliability and increase cooling efficiency. Furthermore, they have developed a new 30mm Optional fan with ball bearings and a full aluminium case that has been specifically developed to guarantee up to 28000 RPM and to dissipate heat in hot conditions and to improve durability.

Source: Reds Racing [reds-racing.com]

The post Reds Racing 1/8th Z8 Pro ESC Gen2 appeared first on Red RC.

Ultimate EFRA 2142 offroad black HD pipe set

Posted: 03 Sep 2020 06:59 AM PDT

Ultimate Racing’s EFRA 2142 Black HD off-road exhaust set is a heavy-duty variant of the standard chrome-finish pipe set. The high-quality, super strong exhaust is made of aluminium and features a black surface coating for improved durability and easier cleaning. Due to its high rigidity it also offers better resonance for improved overall performance while the dark surface coating further improves heat dissipation. The pipe also features the Fast-Lock system for an optimised power curve, higher top speeds and better fuel mileage. As for the characteristics, the exhaust and muffler combination promises precise and linear throttle response in high RPM range with a great top end speed and will provide great power and speed at high RPM. Included comes mounting hardware such as springs and gaskets.

Source: Modelix Racing [modelixracing.com]

The post Ultimate EFRA 2142 offroad black HD pipe set appeared first on Red RC.

Infinity IF15 engine mounts for OS

Posted: 03 Sep 2020 06:22 AM PDT

New from Creation Model for the IF15, come this pair of engine mounts specially designed to work with OS .12 engines. Compared to the standard kit blocks hey have been lowered and allow the engine crankcase to sit as close to the chassis as possible without touching, contributing to a lower centre of gravity, while the cooling fins on the side allows the engine to better dissipate heat and help prevent overheating during a race. Not to be used in combination with other brands of engine.

Source: Creation Model [creationmodel.net]

The post Infinity IF15 engine mounts for OS appeared first on Red RC.

HNMC GP2020 – Race report

Posted: 03 Sep 2020 04:41 AM PDT

The HNMC GP2020 took place over the recent bank holiday weekend with the club able to host the race during the Covid-19 closures having worked closely with the BRCA on safety solutions to make it happen. The format has remained the same for last three years with Saturday having controlled practice, Sunday is for qualifying with finals on Monday. Saturday was a damp day with drivers in heat 9 and 10 deciding not to run as it was so wet. On to qualifying and in Nitro Buggy Callum Niblett took the top spot with Jamie Clancy and Simon Reeves taking rounds 3 and 5 to end up 2nd and 3rd. Truggy would see James Baxter from Richard Cousins and John Niall in 3rd, while in E-buggy it was Michael Lightfoot from Darren Hayden-Ball with Mike Cradock. Evening fun was had with the longest distance travelled with one full tank of fuel. The winner was Glenn Smith, 2nd went to Toby Nicoll, while Craig Russell was 3rd, the top 2 completing 16 laps each, well off the record held by Karl Jackson of 18 laps back in 2018.

Just before main event would be the Junior final and this was won by Dylan Saunders ahead of Erik Lykke in 2nd and Mathew Peters 3rd.

The Nitro Buggy final would see Callum Niblett lead for 25 minutes before Jamie Clancy would reel him in to take the lead with 8 minutes to go and take a hard-fought win, while Simon Reeves completed the podium in 3rd.

E-Buggy was hard fought over three legs and only decided in the last one with Michael Lightfoot 1st, Darren Hayden-Ball second and Mike Cradock in 3rd

Truggy lastly battled between James and Richard with James Baxter 1st Richard Cousins 2nd and John Niall 3rd.

Source: HNMC [hnmc.co.uk]

The post HNMC GP2020 – Race report appeared first on Red RC.

NathoBuilds ride-height blocks

Posted: 03 Sep 2020 02:47 AM PDT

Available in 5 different colours, NathoBuilds’ new ride height blocks have been 3d printed from high quality PLA+ material. Each set of 4 can measure 17mm, 18mm, 19mm, 22mm, 23mm, 24mm, 25mm, 27mm, 28mm, 29mm & 30mm ride heights and they are used by simply placing the required height number facing up.

Source: NathoBuilds [nathobuilds.com]

The post NathoBuilds ride-height blocks appeared first on Red RC.

Muchmore ROAR spec XR high torque rotors

Posted: 03 Sep 2020 01:56 AM PDT

Muchmore have expanded their range of rotors for their Fleta ZX V2 modified and stock racing motors with the addition of two new versions. These super ultra high torque type meet ROAR specs for for 1/12, Touring and 1/10 2wd & 4wd buggy. The two new versions are MR-FZR19XR 12.5×7.25×25.3mm and MR-FZR21XR 12.5×7.25×24.2mm.

Source: Muchmore [muchmoreracing.net]

The post Muchmore ROAR spec XR high torque rotors appeared first on Red RC.

T-Works 4.5mm socket driver

Posted: 03 Sep 2020 01:30 AM PDT

More new tools from T-Works with the release of this 4.5mm socket driver. Like the rest of the tools in this range it features a hardened steel tip, 60mm long in this case, and a lightweight aluminium tool handle that has the tool size represented on the top by machined rings for quick and easy reference.

Source: T-Works [rc-tworks.com]

The post T-Works 4.5mm socket driver appeared first on Red RC.

Sweep Racing Cuby 1/10 scale turf tire

Posted: 03 Sep 2020 01:19 AM PDT

Sweep Racing have introduced its new Cuby tire for 1/10 scale turf racing. The new tire is unlike any other currently on the market. The square-shaped lugs provide tremendous grip on the long astro turf surfaces while the smaller carcass provides better consistency and more corner speed. Sweep offers these tires in 2wd/4wd rear and 4wd front with yellow compound available now and more compounds coming soon.

Source: Sweep Racing [sweepracing.com]

The post Sweep Racing Cuby 1/10 scale turf tire appeared first on Red RC.

SMJ LCG balance weights

Posted: 03 Sep 2020 01:04 AM PDT

SMJ in Japan have released a range of LCG balance weights in various sizes. The round balance weight is highly versatile with the surface area of the mounting point reduced as much as possible so that it does not affect the chassis flex when installed in the chassis. A unique feature is the two mounting screw holes that allow you to fine tune the weight balance. It also means it can be prevented from interfering with other parts and allows for more flexibility in the location of installation. Available in 5, 7.5 and 10 gram weights.

Source: SMJ [smj-rc.com]

The post SMJ LCG balance weights appeared first on Red RC.

X-Partz Storage Tubez

Posted: 03 Sep 2020 12:49 AM PDT

From X-Partz, and the first item in what they expect to be a large range of storage solutions, comes these storage ‘Tubez. As the name would suggest these clear plastic tubes are ideal for storing a whole host of parts such as hardware, springs, tie wraps, connectors, wire etc. Fitted with a hex-cap to prevent from rolling off your pit table or workspace, it comes supplied 3 Tubez per set.

Source: X-Factory UK [xfactoryrc.co.uk]

The post X-Partz Storage Tubez appeared first on Red RC.