Laden...
Red RC - RC Car News |
| Ronda Drake wins at Revelation Raceway club race Posted: 22 Jun 2020 07:47 AM PDT Revelation Raceway of Montclair, California held their June club race this past weekend, attracting 65 entries. In Open Nitro Buggy it was Mugen’s Adam Drake with the overall TQ, however after the 20-minute A-main event it was Adam’s wife Ronda (Mugen) with the win some 4.8 seconds in front of Xray’s Daniel Blalock. Further 19 seconds behind, David Carrasco Jr. (HB Racing) would round out the top 3 result while Adam had to settle for 4th overall following some issues in the second half or the main. Image: Mugen [mugenracing.com] The post Ronda Drake wins at Revelation Raceway club race appeared first on Red RC. |
| Posted: 22 Jun 2020 06:36 AM PDT MonacoRC have introduced an updated version of their USB-to-RC-receiver adaptor with the V2 offering ultra fast FTP. The adaptor connects a model car radio system to a MS Windows-based PC, allowing to use RC car simulators such as VRC Pro with your own radio gear. Due to the design the device does not need any drivers, making it a plug & play. It works with every transmitter and receiver and simulates the ESC and steering servo. It also supports all the functions of the transmitter such as servo speed, curve and more. All that is needed to get it running is a free USB port on the computer, a MS Windows-based PC or an Apple Mac running Parallel or BootCamp and Windows. The adaptor is available with a blue or red case from now on. Source: MonacoRC [monacorc.com] The post MonacoRC V2 USB adaptor appeared first on Red RC. |
| ZooRacing 3-piece 190mm touring car wing set Posted: 22 Jun 2020 05:38 AM PDT Available now from ZooRacing is their new 3-piece wing set that includes three different design wings to fine-tune the aerodynamics of most of today’s 1/10th scale 190mm touring car bodies. Included are the wing of the ultra-popular DBX/PreoPard/ZooZilla series, the highly-curved HellCat rear wing as well as the new BayBee rear wing, all moulded from high-quality polycarbonate. Also included are a total of six polycarbonate endplates. Using the set comes in handy especially when running ZooRacing’s ultra lightweight 0.5mm bodies that greatly profit from the tougher and less flexible rear wings as they improve overall downforce without adding too much weight. In addition the different shapes of the wings allow to fine-tune the aerodynamic balance if conditions call for it. The wing set is usable with all 190mm touring cars that use a 100mm wing post spacing, they come un-cut and are supplied in clear high-quality polycarbonate material. Source: ZooRacing [zoo-racing.com] The post ZooRacing 3-piece 190mm touring car wing set appeared first on Red RC. |
| Kyosho ZX7 reversible servo mount set Posted: 22 Jun 2020 03:12 AM PDT Coming soon from Kyosho is their new reversible servo mount set for the Lazer ZX7 1/10th scale 4WD buggy. The kit includes an aluminium inner servo mount, an outer servo mount post as well as a flippable upper brace that enables the driver to run the steering servo either on the left or the right hand side of the buggy, allowing to adjust the electronics layout and thus overall weight balance. All parts are machined from high-quality aluminium for exceptional stability and precision and they come dark anodised for surface protection and looks. Source: Kyosho [kyosho.com] The post Kyosho ZX7 reversible servo mount set appeared first on Red RC. |
| Yokomo YZ-4SF2 1/10th 4WD buggy kit Posted: 22 Jun 2020 02:56 AM PDT Yokomo have officially unveiled their new YZ-4SF2 1/10th scale 4WD buggy kit. The latest incarnation of the IFMAR World Championship winning YZ-4 platform utilises about 80 percent of new or redesigned parts with the bulkheads, motor mount, and slipper clutch being significantly lighter for improved overall performance. Also included is a new steering system that features an updated Ackermann geometry that is of a milder setting to compensate the improved overall agility due to the lower car weight, which comes in handy especially on high-bite surfaces for smoother, more predicable car control. New to the SF2 are also updated front and rear lower arms that now feature 3.5mm inner and 3.0mm outer suspension pins for durability. The arms are of a reinforced design for improved durability and new lower shock mount inserts enable the driver to access more complex setups. As for the slipper clutch, the new design is a lot smaller for a lower weight and quicker spool up, ensuring crisp throttle response. The included battery mount allows to shift the battery pack forth and back to adjust the overall weight balance while the new gearboxes allow for diff height adjustments to better adapt the buggy to different traction conditions while new cam-type inner upper camber link mounts allow for quick setup changes. The kit comes including dirt and carpet specific springs and anti-roll bars and it will hit stores soon. Key features: Source: Yokomo [teamyokomo.com] The post Yokomo YZ-4SF2 1/10th 4WD buggy kit appeared first on Red RC. |
| T-Works starter box carry sling Posted: 22 Jun 2020 02:12 AM PDT T-Works have introduced their new carry sling that can be attached to basically every nitro engine starter box. The accessory is made of tough, black fabric and its design allows to fix it using the included hook and loop straps, ensuring quick removal when using the starter box while attaching the carry sling for transportation purposes is a matter of seconds. Using the strap allows drivers and mechanics to carry any starter box conveniently over the shoulder, which ensures they have both hands free for items such as the car, pit bag, fuel and more. Source: T-Works [rc-tworks.com] The post T-Works starter box carry sling appeared first on Red RC. |
| RudeBits shock & diff seals grease Posted: 22 Jun 2020 01:48 AM PDT New to RudeBits’ Rude not to! range of accessories is a water-resistant and Lithium-based shock and diff seals grease. Coming in large 10ml jars the lube will ensure protection of shock and differential seals, ensuring a long life of silicone O and X-rings as well as smooth overall performance. Source: RudeBits [rudebits.net] The post RudeBits shock & diff seals grease appeared first on Red RC. |
| Marcus Kaerup sweeps Danish EP Offroad Nats Rd1 Posted: 22 Jun 2020 01:07 AM PDT The Odense RC Minirace Center hosted round 1 of the Danish Electric Off-road Nationals this past weekend. Sunday saw the running of the 4WD Buggy and Racing Truck classes and it was young Marcus Kaerup (Team Associated) with the overall TQ in 4WD Buggy after winning all three qualifiers, leaving behind Frederik Hovgaard (Yokomo) in 2nd and Mad Koue (Team Associated) in 3rd. The A-finals then saw Marcus with the wins in A1 and A2 for an early overall victory as Frederik and Mads finished in 2nd and 3rd overall respectively. The Racing Truck class was won by Jan Larsen from Soren Hempel and Hendrik Rasmussen. Already on Saturday it was Marcus Kaerup with the win in the 2WD class as Jonas Kaerup and Frederik Hovgaard came in 2nd and 3rd respectively. Image: Jonas Kaerup The post Marcus Kaerup sweeps Danish EP Offroad Nats Rd1 appeared first on Red RC. |
| MST FXX 2.0 S carbon fibre steering arm set Posted: 22 Jun 2020 12:54 AM PDT Coming from MST and made for the FXX 2.0 S drift car is a carbon fibre steering arm set. The kit includes machined carbon fibre arms, a ball-raced carbon fibre steering plate, a carbon fibre steering lever, as well as red anodised bellcrank hubs all of which make for a more precise and better performing steering setup, comparable to the KMW version kit. In addition the updated steering geometry allows for increased steering throw which further adds to the overall performance. Source: MST [rc-mst.com] The post MST FXX 2.0 S carbon fibre steering arm set appeared first on Red RC. |
| RC-Cox T4’20 high & low flex aluminium chassis Posted: 22 Jun 2020 12:17 AM PDT PPM RC Racing have released the new RC-Cox high and low flex aluminium main chassis plates for the Xray T4 2020 mid-motor touring car. Machined from high-quality 7075-T6 aluminium the chassis offer a different outer shape compared to Xray’s original design, resulting in different overall flex characteristics. Available in a highly machined high flex and solid design low flex variant, the chassis allow to adapt the car to various medium to very high bite track conditions. Source: PPM RC Parts [ppm-rcracing.com] The post RC-Cox T4’20 high & low flex aluminium chassis appeared first on Red RC. |
| You are subscribed to email updates from Red RC. To stop receiving these emails, you may unsubscribe now. | Email delivery powered by Google |
| Google, 1600 Amphitheatre Parkway, Mountain View, CA 94043, United States | |
Laden...
Laden...
