Red RC - RC Car News

Reedy Zappers SG3 Competition 1S & 4S LiHV packs

Posted: 08 May 2020 11:11 AM PDT

Associated Electrics have introduced the new Reedy Zappers SG3 LiHV 1S and 4S batteries. Zappers SG3 batteries feature state-of-the-art LiPo chemistry with an emphasis on lower internal resistance with improved durability and cycle-life. More power, improved durability, and high capacity provide world-class performance. Zappers SG3 batteries feature a 3.8V/cell nominal voltage, which means that the battery can be safely charged to 4.35V/cell. Even when the typical 4.20V/cell charging limit is enforced, Zappers SG3 cells shine thanks to their inherently flat discharge curve, which results in higher voltage deeper into the race. Zappers SG3 batteries are available in several configurations for a variety of on-road and off-road applications. A high quality, durable hard case helps prevent damage while embedded socket connectors keep power-robbing resistance to a minimum. Male ESC connectors are included. New for 2020 are the 1/12th scale specific 8200mAh 85C 3.8V and 6600mAh 115C 3.8V 1S packs as well as the 6400mAh and 5200mAh LP 15.2V 4S packs, the latter are ideal for demanding 1/8th scale applications.

Source: Associated Electrics [associatedelectrics.com]

The post Reedy Zappers SG3 Competition 1S & 4S LiHV packs appeared first on Red RC.

JConcepts RC10GT GTB2 ’96 authentic body shell

Posted: 08 May 2020 11:00 AM PDT

Coming from JConcepts is their new GTB2 body shell for the Team Associated RC10GT tub and flat chassis 2WD gas trucks. When it came time to make changes and upgrade the original Team Associated RC10GT, there were some 1996 updates featuring front and rear shock tower geometry changes. Along with these changes, the truck took on some changes in the body department to house the new shock positions and increased width of the body for different engine and exhaust combinations. As the RC10GT evolved, the team went to a flat chassis layout and then later extended the length to keep up with the demands of higher speed tracks and increasingly bumpier conditions. The Gas Truck Body 2 was the combination of everything racers loved about gas powered stadium trucks in the mid to late 1990’s. By this time, a slightly rounder, softer look was being adopted into the mainstream and nobody knew gas racing like “the team”. JConcepts, with approval from Team Associated, have reintroduced the genuine GTB2 shell to the masses. This allows the faithful to recreate, rebuild and race with authentically styled bodies from the heyday of competitive gas truck racing. A lot of work went into making this project a reality and thankfully, Team Associated preserved the iconic molds from the 1996 calendar year. JConcepts was able to restore older generation construction and with a blend of today’s materials, the GTB2 body is back out on the market.

Everyone knows the body 2 style, the front hood-scoop which is forged over the front shock geometry with soft lines along with front headlights and grille. The neutral cab design with built-in number plates and roll-bar stand-out which gave enthusiasts their first memory of gas stadium trucks. Wheel wells on this body are extremely simple, captured with body lines allows the customer to alter them and reconfigure as wanted or needed. The wider stance of the body was handy for using different engine types featuring side exhaust or incorporating the use of a pull-start from an RTR engine. The 1996 body includes a rear spoiler which is much needed for slippery race conditions and 3mm mounting hardware. Also, the set contains window mask, and, of course, clear polycarbonate body but no decal sheet.

Source: JConcepts [jconcepts.net]

The post JConcepts RC10GT GTB2 ’96 authentic body shell appeared first on Red RC.

MR33 hard case tool bag

Posted: 08 May 2020 07:13 AM PDT

Tonisport have introduced the new MR33 brand hard case tool bag. It allows to stow a complete set of tools in the included foam inserts one of which is pre-cut for up to five allen wrenches and two hex drivers while the second insert is made to carry droop blocks, height gauges, scissors, the multi shock tool and the circle droop gauge. The inserts simply get placed over each other in the hard case bag for a maximum in space saving. The foam inserts are made for Hudy and Scorpion tools to name just a few and they fit the soon to be released new MR33 tools fit as well.

Source: Tonisport [tonisport.de]

The post MR33 hard case tool bag appeared first on Red RC.

Xray RX8’21 1/8th nitro on-road kit

Posted: 08 May 2020 05:35 AM PDT

Xray have announced the soon release of their new RX8’21 1/8th scale nitro on-road kit. The IC Track car features several updates compared to the previous version such as a new stealth black design including parts such as the bulkheads and shock absorbers, doing away with the company’s iconic orange anodising. Also part of the package are lightweight bulkheads for improved flex characteristics, while a new chassis layout moves the engine closer to the rear axle for improved traction and stability. In addition a redesigned radio plate allows the chassis to flex more, increasing steering and front end grip. Next up is a new ribbed 2-speed carrier for improved and more consistent shifting thanks to increased cooling capacity while a lightened brake disc adapter reduces rotational masses. The lighter and shorter rear solid axle further reduces rotating masses while expanding the rear width adjustment possibilities.

Other features include new drive belts to match the updated engine position and chassis layout and all-new composite rear body holder arms from harder material make for increased stability. In addition all-new and shorter rear extensions, with a new shock absorber geometry and featuring a threaded hole to secure the shock mount screw for easier maintenance, increase overall traction. Last but not least comes an updated front bumper that improves durability and reduces body flex in high speed corners. The 2021 kit will hit stores very shortly.

All-new features:
– All-new stealth black design
– All-new lightened bulkheads for improved flex characteristics
– All-new chassis layout moves the engine closer to the rear axle for increased traction and stability
– All-new redesigned radio plate allows more flex to generate more steering and traction
– All-new ribbed 2-speed carrier for improved and more consistent shifting
– All-new lightened brake disc adapter to reduce the rotating mass
– All-new lighter & shorter rear solid axle to reduce rotating mass and to expand the rear width adjustment possibilities
– All-new drive belts to match the updated engine position and chassis layout
– All-new composite rear body holder arms from harder material for increased stability
– All-new shorter rear extensions with a new shock absorber geometry for increased traction; featuring a threaded hole to secure the shock mount screw for easier maintenance
– Updated front bumper to improve durability and reduce body flex in high speed corners

Find the full presentation here.

Source: Xray [teamxray.com]

The post Xray RX8’21 1/8th nitro on-road kit appeared first on Red RC.

SRC RX8 & NT1 dynamic battery plate & weights

Posted: 08 May 2020 05:24 AM PDT

SRC have introduced their new battery plate with integrated brass weights for Xray’s RX8 and NT1 nitro on-road kits. The super light cars still have a margin even under the new EFRA rules thanks to lightweight transmissions and materials. With SRC’s battery weight sets additional weight is placed as low as possible while allowing to fine-tune the weight balance by shifting the weights forth and back. The plates are machined from high-quality aluminium and they can be loaded with up to five brass weights of 12g to 13.5g in weight.

Source: SRC Racing [srcracing.it]

The post SRC RX8 & NT1 dynamic battery plate & weights appeared first on Red RC.

T-Works roll out X20 optionals

Posted: 08 May 2020 03:46 AM PDT

Coming from T-Works and made for the Serpent X20 mid-motor touring car are several new option parts. First up is a full set of titanium ball ends that replace the standard steel parts. The ball ends feature a polished finish for smooth suspension action and they are made of high-quality 64 grade titanium for a low weight and exceptional strength. Also new is a 3-piece set of titanium turnbuckles as well as a 81-piece UFO head titanium screw kit. Like the ball ends, the turnbuckles and screws are made of high-quality titanium. Also available are a 90-piece gold-colour steel screw kit for bling and a 19-piece precision ball bearing set as a replacement for the kit bearings.

Source: T-Works [rc-tworks.com]

The post T-Works roll out X20 optionals appeared first on Red RC.

MST CFX-W J45C trail truck kit

Posted: 08 May 2020 02:23 AM PDT

Following a couple of teaser images MST have announced the release of their new CFX-W J45C trail truck kit. The 4WD vehicle features portal axles front and rear for improved ground clearance and climbing performance, a planetary centre gearbox with dual slipper clutch, all-metal transmission gears as well as heavy duty driveshafts. Other features include high-quality all-aluminium shock absorbers, aluminium 4-link suspension, full ball bearings, and a realistic C-channel frame kit. 1.9” wheels and tyres with a realistic tread design as well as the name-giving J45C body shell round out the package.

Features:
– Front and rear MPA portal axles
– TC80 aluminium shock absorbers
– Planetary gearbox and dual slipper clutch
– All-metal transmission gears
– 1.9” wheels & tyres
– Aluminium 4-link suspension
– Full ball bearings
– Heavy duty CVD shafts
– Realistic steel C-channel chassis frame
– Large steering angle
– Gear ratio 1:36.3 to 1:54.4
– Tyre width/diameter: 40mm/120mm

Source: MST [rc-mst.com]

The post MST CFX-W J45C trail truck kit appeared first on Red RC.

Klinik RC Max-Flo 6.25” buggy wing

Posted: 08 May 2020 12:22 AM PDT

Klinik RC have introduced their new Max-Flo 6.25” rear wing for 1/10th scale off-road buggies. Made in the USA from high-quality .030” polycarbonate material for maximum durability and less weight, the wing measure 6.25” wide, which is narrower than average wings for a more centralised and effective downforce, all while providing more tyre clearance at full compression. The wing comes in sets of two, including decals and it is suitable for most 1/10th scale buggies.

Source: Klinik RC [klinikrc.com]

The post Klinik RC Max-Flo 6.25” buggy wing appeared first on Red RC.

SWorkz aluminium servo arms

Posted: 07 May 2020 11:57 PM PDT

SWorkz have introduced their new 2-way aluminium steering and universal design throttle servo arms. Starting with the 2-way steering arm, the reversible design allows to use it both with the SWorkz S35 nitro and electric buggies with the shorter side fitting the nitro kits and the taller side being ideal for the electric-powered vehicles. Both sided features a clamping design utilising a small 2mm x 6mm cap head screw that prevents the servo horn from falling off during the race.

Also new is the aluminium universal design throttle servo arm. Its dimensions perfectly suit the S35 nitro kits but it is also usable for a range of other nitro off-road buggies and trucks. With its sturdy design it provides faster and more reliable throttle and brake action and its clamping design ensures it will not fall off during a run. Both arms are machined from high-quality aluminium and they sport a black surface coating for wear and looks. Both 23T and 25T variants are available to suit most of today’s servos.

Source: MW RC Cars [mwrccars.at]

The post SWorkz aluminium servo arms appeared first on Red RC.