Red RC - RC Car News

New from Exotek and made for the 3Racing FGX formula car are precision-machined and laser-engraved 7075 aluminium rear hubs. The raised hub design improves the roll centre, that is +1mm higher with the Exotek hubs, and creates better CVD clearance from the lower arm. The hubs come anodised black and silver chamfered to match the factory looks and they fit the FGX Evo and original FGX.

Source: Exotek [exotekracing.com]

The post Exotek FGX rear aluminium hub set appeared first on Red RC.

The Barceloneta RC Raceway in Puerto Rico held the opening round of the BRCC N.E.O.S. recently and it was Raymond M. Soto with the overall TQ in the 1/8th GTe class. After the mains however it was Carlie Lopez with the win from Gabriel Velez in 2nd. Raymond had to settle for 3rd overall, rounding out an all-IGT8 podium.

Source: IGT8 [igt8.com]

The post Carlie Lopez wins at BRCC N.E.O.S. opener appeared first on Red RC.

Coming from Xray and made for their XB4’20 1/10th scale 4WD buggy are new graphite-reinforced differential parts. Available for the buggy’s large volume front and rear diffs are both the case and cover as separate, graphite-reinforced items. The lighter and tougher material will withstand higher temperatures and wear better, holding the screws securely in place even when using high-powered motors and/or when driving on very high-bite or rutted tracks. Both the case and cover are available separately.

Source: Xray [teamxray.com]

The post Xray XB4’20 large volume graphite diff case & cover appeared first on Red RC.

UK Intellect distributor Schumacher has introduced the 2020 Platinum LiPo range. Recognisable by the new labelling with metallic blue lettering the 2020 versions once again improve of 2019 specs by offering better power and runtime. Intellect offer a huge range of batteries for all applications and required weights for perfect chassis balance and centre of gravity with every battery having a burst current of 120C and LIHV technology. The new packs are BRCA/EFRA legal as of April 1st 2020 with the stick range including the following specifications: 2S 10000mAh 25.1mm, 2S 8400mAh 25.1mm, 2S 7600mAh 25.1mm, 2S 7000mAh 22.5mm, 2S 6000mAh 22.5mm, and 2S 5600mAh 19.5mm. The 2020 shorty range includes the following specifications: 3S 4200mAh 25.1mm, 2S 6200mAh 25.1mm, 2S 5000mAh 25.1mm, 2S 4400mAh 20mm, and a 2S 4200mAh 18.5mm . The range is rounded out by a 1S 8200mAh and a 1S 6600mAh Shorty.

Source: Schumacher [racing-cars.com]

The post Intellect 2020 Platinum LiPo battery range appeared first on Red RC.

Absima from Germany have introduced their forthcoming new Cube 2.0 AC multi-chemistry charger. Of a simple design the compact device allows to charge 2S and 3S LiXX as well as one to eight-cell NiXX batteries, making it ideal especially for nitro racers who can conveniently fill modern transmitter as well as receiver batteries without having to carry around full-blown competition chargers. The display-less charger is less prone to be damaged due to dust and dirt with charge current selection being carried out by a simple sliding switch. An integrated 2S to 3S LiPo balancer makes for secure charging of Lithium batteries while the auto-detect NiXX program allows to charge old school NiMH battery packs. The charger comes including connection wires and it will hit stores in March.

Features:
– Delta-peak NiXX programs
– Auto battery detect
– LiPo, LiFe, NiMH, and NiCd compatible
– Integrated XH(R) 2S and 3S balancer port
– Integrated power supply
– 4mm battery connectors
– LED indicators for battery type and charging status

Specifications:
– Voltage input: AC 230V
– Charge current: 1.0A / 3.0A / 5.0A
– Charge power: max. 50W
– Balancer connector: XH(R) 2/3S
– Balance current: 350 mA
– Cell count: 2S-3S LiXX, 1 to 8 cell NiXX
– Dimensions: 109x109x55mm
– Weight: 450g

Source: Absima [absima.com]

The post Absima Cube 2.0 AC multi-chemistry charger appeared first on Red RC.

Hudy have announced the release of their new tiny 8-compartment one-piece hardware box. Ideal to store small items such as nuts, shims, washers and pins, the tough, durable, and translucent plastic box features eight compartments of two different sizes, each with a separate latching cover. The box measures 100x63mm, it is decorated with Hudy graphics to make it stand out and it comes without the hardware visible in the alternative image.

Source: Hudy [hudy.net]

The post Hudy tiny one-piece hardware box appeared first on Red RC.

Coming from Usukani and made for their PDS series RWD drift car kits are several new option parts. First up is a stand-up front shock tower kit that offers multiple upper shock and inner camber link mounting positions. The shock stay os machined from high-quality carbon fibre and it includes all needed mounting hardware. Also new and usable with the PDS drift car kits is a transverse battery mount that allows for a wide range of weight bias adjustments. Included come machined carbon fibre battery locators, steel clips as well as mounting hardware. Last but not least comes a rear speed controller mount for the PDSL and PDSH kits. Machined from high-quality carbon fibre the mounting plate includes all needed hardware.

Source: Usukani [usukani.com]

The post Usukani PDS series carbon fibre optionals appeared first on Red RC.

Xray have announced the release of a forward servo mount for the T4 2020 touring car. The CNC-machined and black coated forward servo mount is made of Swiss 7075-T6 aluminium and it allows the mounting of the servo holder in a more frontward position which increases steering and steering response. The use is recommended for conditions where improved steering response is needed. Using the forward position makes the car more reactive, however at the expense of stability.

The above servo mount must be used with the CNC-machined graphite floating forward servo holder plate. The part is made of premium-grade 3mm graphite material to match the remainder of the car’s carbon fibre parts. Both the servo mount and servo holder plate are usable exclusively with the T4 2020.

Source: Xray [teamxray.com]

The post Xray T4 forward servo mount appeared first on Red RC.

Xtra Speed have introduced new optional parts for the Axial Capra vehicles. First up is a 2-piece front or rear brass axles steering knuckle caps set. The heavy brass parts can be fitted to the front or rear axles and they add weight for improved traction. In addition they improve visual impact with their brake-disc-like appearance. Also new are a steel universal driveshaft set as well as stainless steel centre and front/rear differential skid plates. Available separately the parts help to protect the transmission from rocks and other obstacles on the trail.

Source: Xtra Speed [facebook.com]

The post Xtra Speed roll out new Capra optionals appeared first on Red RC.

Coming soon from Tamiya is their new 3.5mm carbon fibre shock tower set for the popular TT-02 entry-level touring car. The shock stay offers four different upper shock mounting positions and locations for the body posts, allowing to use it both in the front and the rear of the chassis. The geometry allows to use it with the standard TT-02 friction damper but best results are achieved in combination with the #53571 TRF shocks absorbers and the #54874 adjustable upper arm set. Included with the shock tower comes an assortment of mounting hardware and the set will become available by mid-March.

Source: Tamiya [tamiya.com]

The post Tamiya TT-02 3.5mm carbon fibre shock tower appeared first on Red RC.