Red RC - RC Car News

CML Distribution Centro & Voltz 4S LiPo battery packs

Posted: 04 Feb 2020 11:06 AM PST

CML Distribution have introduced two new Centro and a single Voltz 4S 14.8V hardcase LiPo battery pack for 1/8th scale applications. The Centro packs target competitive racing and are available as 7600mAh 100C and 6800mAh 75C variant, while the Voltz pack is built using 5000mAh 50C cells, making it ideal for demanding bash applications and RTR vehicles. All utilise protective hardcases for security and they come pre-soldered with EC5 connectors and balancer ports.

Source: CML Distribution [cmldistribution.co.uk]

The post CML Distribution Centro & Voltz 4S LiPo battery packs appeared first on Red RC.

VRP XV3 XB2/XB4 series shock pistons

Posted: 04 Feb 2020 08:56 AM PST

Vision Racing Products have announced the release of their long-awaited XV3 shock pistons for the Xray XB2 and XB4 based 1/10th scale off-road vehicles. Available as Black Flat and EU version white variants, the pistons come complete with the transition valve pre-installed. The rebound booster hole has been precision drilled to the exact size VRP’s testing found to be the best all around setting. This yields excellent results that are proven on a variety of track surfaces; from rough, blown out tracks, to smooth, indoor clay. The difference between the Black Flat and the EU White pistons is the return rate. The return hole in the EU is smaller then the Black and gives less rebound. This matches up better for higher grip surfaces like carpet and turf. The pistons are available in ten different hole diameter specifications from now on.

Source: Vision Racing Products [visionracingproducts.com]

The post VRP XV3 XB2/XB4 series shock pistons appeared first on Red RC.

JConcepts BAJR V2 sand rail body shell

Posted: 04 Feb 2020 08:42 AM PST

JConcepts have introduced their new BAJR V2 sand rail body shell for Slash 2WD and 4×4 trucks. Pronounced badger, the round Baja-esque profile of the cab area gives that familiar desert appearance. As the design develops toward the rear, the pronounced roof stabilising fin is large and in charge and rear deck area makes this body unmistakably JConcepts. An included rear wing with hardware adds rear downforce and aggressive sand throwing looks. The BAJR V2 is all about being unique, competition ready and concept inspired. The body fits the Traxxas Slash 2WD and 4×4 as well as equivalent vehicles and it can be run with a multitude of tyre styles. As usual the body comes clear, including window masks and a decal sheet.

Source: JConcepts [jconcepts.net]

The post JConcepts BAJR V2 sand rail body shell appeared first on Red RC.

Lee Martin and Creation Model/Infinity part ways

Posted: 04 Feb 2020 08:32 AM PST

Lee Martin has taken to social media the split between him and chassis sponsors Creation Model/Infinity. The former EFRA European and EOS Champion lost his sponsorship already last December and only made it official now and in the wake of next weekend’s Montpellier GP. Lee has yet to announce a new partnership but it is awaited to happen very soon. In the meantime Lee has the following to say:

The first 1/8th scale race of the year is this weekend at the Montpellier GP and it’s time that I mention that I am no longer with Infinity / Creation Model team. In the same fashion as a couple of my friends, I was too let go on the 18th December. Since then It’s been a difficult time for myself and my family as the news was unexpected. But with one door closing, another one opens and it’s a massive door! It’s an opportunity that I have been wishing to happen for years and I am super excited to get going! That’s all I will say for now, more details will follow very shortly.

The post Lee Martin and Creation Model/Infinity part ways appeared first on Red RC.

Torpine R11F horizontal body post rear shock tower

Posted: 04 Feb 2020 07:52 AM PST

Coming from Torpine is a new design ARC R11F rear shock tower for the use with horizontal body posts. Cut from high-quality carbon fibre the shock tower allows to attach the body posts horizontal instead of vertical which makes for a lower overall centre of gravity and improved visual impact. In addition the tower features added upper shock mounting positions, resulting in a wider setup range.

Source: Torpine [torpine.com]

The post Torpine R11F horizontal body post rear shock tower appeared first on Red RC.

Xray 12mm aluminium wheel adapters -1.25mm

Posted: 04 Feb 2020 06:42 AM PST

Xray have introduced their new -1.25mm wheel adapters for their range of 2WD and 4WD off-road vehicles. Machined from high-quality aluminium and coming black anodised for wear and looks the 12mm wheel adapters help to reduce the overall track width which can be beneficial in certain track conditions. The clamping-style wheel adapters come as pairs and they are meant to fit the XB2, XB4, XT2 and XT4 kits.

Source: Xray [teamxray.com]

The post Xray 12mm aluminium wheel adapters -1.25mm appeared first on Red RC.

Monaco RC Belt Booster pulley & belt conditioner

Posted: 04 Feb 2020 05:44 AM PST

Monaco RC have introduced their new Belt Booster additive designed to obtain maximum transmission smoothness. Applied directly on the belts and pulleys, the chemical increases the parts’ smoothness without compromising their strength and durability, improving overall performance in both Stock and Modified classes. The additive withstands extreme temperatures while also protecting the rubber and plastic parts. The conditioner comes in handy 100ml bottles with sponge applicator.

Source: Monaco RC [monacorc.com]

The post Monaco RC Belt Booster pulley & belt conditioner appeared first on Red RC.

Answer-RC XB8 carbon fibre side guards & winglets

Posted: 04 Feb 2020 04:07 AM PST

Answer-RC have introduced new carbon fibre optionals for the Xray XB8 buggy in the form of side guards and a front winglet set. Starting with the side guards, these are made from a high-quality carbon kevlar mix, making them super lightweight and strong at the same time. The parts are hand-laid, professionally CNC-finished and around 50 percent lighter than standard moulded parts. Included with the left and right side guard comes suitable hardware.

Also new are the carbon kevlar front wings for the XB8 that were developed as an add-on for the front upper arms. Using the wings will increase front downforce for a sharper steering response and improved control over jumps. The wings include CNC-cut mounting pods and all screws and washers required for installation.

Source: Answer-RC [answer-rc.com]

The post Answer-RC XB8 carbon fibre side guards & winglets appeared first on Red RC.

Midland Indoor Carpet Championship Rd4 – Report

Posted: 04 Feb 2020 03:33 AM PST

Round 4 of the popular Midland Indoor Carpet Championship MiCC was held in Telford, UK this past weekend, attracting over 135 entries including some of the country’s fastest electric on-road racers. The premier Modified Touring class saw Elliott Harper taking the overall TQ after a clean sweep in the qualifiers with Kyle Branson putting his car on P2 on the grid. 13.5T Super Stock Touring had Zak Finlay dominating the qualifiers from Colin Jackson in 2nd. In 17.5T Stock Touring it was Dave Sedgwick with the overall TQ, tie on points with Gareth Hollis, the latter having to settle for P2 on the grid after the tie-breaker.

The single 5-minute Modified A-main saw again Xray’s Elliott Harper leading the way who took the win from tone to tone and with a lap margin on 5th place qualifier, Ben Cosgrove (Awesomatix). Alex Thurston (Capricorn) retained his P3 spot to round out the podium result.

13.5T Super Stock Touring saw TQ Zak Finlay taking the win some 2.6 seconds in front of Colin as 3rd place qualifier, Darren Lee came in 3rd already a lap down, rounding out an all-ARC podium.

Over in the 17.5T Stock Touring class it was 3rd place qualifier, Tim Woron with the win from TQ Dave Sedgwick who would come in 2nd only some 0.3 seconds behind Tim. Chris Parrott, coming from P7 on the grid, completed the top 3 another 2.8 seconds back.

Images: Midland Indoor Carpet Championship [midlandchampionship.com]

The post Midland Indoor Carpet Championship Rd4 – Report appeared first on Red RC.

PerfTec GraviDisk Tungsten balance weights

Posted: 04 Feb 2020 03:13 AM PST

Dutch company PerfTec have introduced their new GraviDisk Tungsten balance weights. Designed for the use with pretty much every on-road and off-road car, the weights are of a very compact design that could be achieved by using high-density Tungsten metal, a material that offers about double the density of bronze and 2.5-times the density of steel, meaning at the same weight of a bronze or steel weight, Tungsten weights are significantly smaller, allowing for easier placement and less wasted chassis space. The basic disc design was chosen to simplify production of the unique metal in order to keep the discs affordable for racers of all levels. The weight discs have an outside diameter of 13mm and are available in two heights: 2.5mm, weighing 6g and 4.0mm, weighing in at 9.5g a piece. The stackable weights feature an inner 3mm hole, making attachment to chassis plates using spare chassis holes a breeze. The GraviDisk weights come as 2-piece sets of the same dimension/weight or as 4-piece set containing two of each weight. The set also includes stainless steel M3 mounting hardware in the form of countersunk screws and self-locking nuts – all packed in a handy stackable box that can be re-used for storing all sorts of RC hardware.

Source: PerfTec [facebook.com]

The post PerfTec GraviDisk Tungsten balance weights appeared first on Red RC.